TM 5-3810-295-34
(2) Remove screws (5), washer (6), lock
19-42. Reassembly and Installation
washers (7), and cover plate (8).
a. Refer to figure 19-15 and reassmble the carrier frame
(3) Remove screws (9), lock washers (10), nuts
as described.
(11), and fenders (12).
(1) Place belly guard (70) on frame, and security with
(4) Remove, if necessary, screws (13), nut (14),
washer (69), lock washer (68), and screws (67). Tighten
screws (15), lock washers (16), screws (17), lock
security.
washer 18), nuts (19), steel pipes (20), screws (21),
(2) Position guard (66) on frame, and secure with
and lock washers (22).
washer (65), lock washer (64), and screws (63). Tighten
(5) Remove screws (23), lock washer (24),
securely.
washers (25), and deck plates (26, 27 and 28).
(3) Install guard plate (62), and secure with washer
(6) Remove screws (29), lock washers (30),
(61), lock washer (60), and screws (59).
nuts (31), and mud guards (32).
(4) Place bracket (58) in position on frame, and secure
(7) Remove screws (33), lock washer (34), nut
with nuts (57), lock washer (56) and screws (55).
(35) and bracket (36).
(5) Install belly pan (54), and secure with washer (53)
(8) Remove screws (37 and 38), lock washer
and screws (52)
(39), nuts (40) and deck supports (41 and 42).
(6) Install anchor shackle (51) and detent pin (50) on
(9) Remove screws (46), and information plat
carrier frame.
(47). Remove screws (48) and information plat
(7) Install information plate (49) and secure with screws
(49).
(48)
(10) Remove detent pin (50) and anchor
(8) Install information plate (47) and secure with screws
shackle (51).
(46).
(11) Remove screws (52), washer (53), and
(9) Position deck supports (41 and 42) on frame and
belly pan (54).
secure with nuts (40), lock washer (9), and screws 07 and
(12) Remove screws (55), lock washer (56),
381
nuts (57), and bracket (58).
(10) Place bracket (36) in proper position, and secure
(13) Remove screws (59), lock washers (60),
with nuts (35), lock washer (34), and screws (33).
washes (61) and guard plate (62).
(11) Install need guards (32) on supports, and secure
(14) Remove screws (63), lock washers (64),
with nuts (31), lock washer (30), and screws (29)
washers (65), and guard (66).
(12) Install deck pats (26, 27 and 28) on carrier frame
(15) Remove screws (67), lock washers (68),
and secure with washer (25), lock washer (24), and
washer (69), and belly guard (70) from carrier fame
screws (23).
52).
(13) Install lock washer (22), screws (21), steel pipes
19-41. Cleaning, Inspection and Repair
(20 nuts (19), lock washer (18), screws (17), lock washer
a. Clean all meal parts of the carrier frame with
(16), screws (15), nuts (14), and screws (13) if removed in
cleaning solvent (Fed.
Spec.
P-D-680, or
disassembly.
equivalent) and dry thoroughly.
(14) Install fenders (12), and secure with nuts (11), lock
b. Inspect frame for dents, cracks, broken welds
washer (10) and screws (9).
and other damage. Check for cracked, broken or
(15) Install cover plates (8), and secure with lock
damaged parts.
washer (7), washer (6), and screws (5).
c. Replace damaged parts as necessary. Repair
(16) Install plates (2, 3 and 4) and secure with screws
broken welds and cracks and straighten bent or
(1).
dented parts.
(17) Install all major assemblies and subassemblies
described in TM 5-3810-295-12 and this manual.
(18) Install utility blade assembly. (para 19-27).
(19) Install rotating gear. (para 19-38).
(20) Install carrier engine assembly. (para 12-6).
(21) Install crane assembly (para 2-18).
Change 1 19-25/(19-26 blank)
