TM 5-3810-300-24&P-3
Fuel Injector
2.1.1
Fig. 23 - Removing or Installing Filter Cap
Fig. 21 - Injector in Calibrator J 22410
NOTE: Refer to Section 2.0 for different
factors that may affect the injector
8. Observe the vial reading and refer to Fig. 19 to
calibrator output reading.
determine whether the injector fuel output falls within the
specified limits. If the quantity of fuel in the vial does not
The calibrator may be used to check and select a set of
fall within the specified limits, refer to Trouble Shooting
injectors which will inject the same amount of fuel in
Chart 6 and Shop Notes in section 2.0 for the cause and
remedy.
Fig. 24 - Removing or installing Plunger Follower,
Plunger and Spring
Fig. 22 - Setting Calibrator Stroke Counter
Page 169