TM 5-3810-300-24&P-3
3.4 BLOWER
Fig. 12-Typical Details and Relative Location of Parts- Six Cylinder Former Reduction Blowers
lobes must be used with a gear having right-hand helix
a. Support the blower end plate, finished surface
teeth and vice versa (Fig. 13).
facing up, on wood blocks on the bed of an arbor press
With this precaution in mind, proceed with blower
NOTE: If oversize oil seals are being used in the blower
assembly, referring to Figs. 11 through 24 as directed in
end plates, use installer J 1682-13 to install the over-size
the text.
oil seal spacers on the rotor
shafts.
1.
Install the lip type oil seals (Fig. 15) as follows:
PAGE 258