TM 5-3810-302-10
TRAVELING - REVERSE.
CAUTION
APPLY THE SERVICE BRAKES AND
BRING THE CRANE TO A COMPLETE
STOP BEFORE SHIFTING THE TRANS-
MISSION INTO REVERSE.
After engine has warmed up, place 2/4 WHEEL DRIVE Iever (17, figure
1.
1) to either 2-WHEEL or 4-WHEEL.
Shift direction control lever (14) from N (neutral) to R (reverse).
2.
NOTE
The back-up alarm will not sound unless the
lights switch (43, figure 4-1 ) is in the STOP
LIGHT mode.
WARNING
THE BACK-UP ALARM SHOULD SOUND
TO ALERT PERSONNEL IN YOUR VICIN-
ITY. IF THE ALARM DOES NOT SOUND,
DEPRESS HORN BUTTON (7). REPAIR
THE BACK-UP ALARM AS SOON AS
PRACTICABLE.
IT IS ADVISABLE TO USE A SPOTTER
WHEN BACKING THE CRANE.
Position shift control lever (13) to 1 (first gear) and release the parking
3.
brake.
Depress the foot throttle pedal (19).
4.
FOUR-WHEEL DRIVE OPERATION.
If more traction is required due to slipping or spinning wheels, engage the
rear axle drive. Engage four-wheel drive as follows:
CAUTION
BEFORE SHIFTING FROM TWO-WHEEL
DRIVE TO FOUR-WHEEL DRIVE (OR
FROM FOUR BACK TO TWO) THE CRANE
TRAVEL MUST BE STOPPED.
