TM 5-3810-302-10
Push down on park brake lever (22) and release foot brake pedal.
3.
CAUTION
UNDER NORMAL CONDITIONS, DO NOT
SHUTDOWN ENGINE WITH A LOAD SUS-
PENDED IN THE AIR.
If necessary, retract and lower the boom over the front (travel position).
4.
Turn ignition switch (35) to OFF.
5.
WARNING
BEFORE LEAVING THE CRANE, ENSURE
THE TURNTABLE LOCK PIN IS ENGAGED.
GENERAL CRANE OPERATION.
CONTROL LEVER OPERATION.
The control lever operation for crane functions is standard, i.e., the closer the
lever is to neutral (center), the slower the system responds. This applies to
both forward and rear movement of the applicable lever. The control lever
should be returned to neutral to hold the load.
CAUTION
NEVER FEATHER THE HOIST CONTROL
TO HOLD THE LOAD. (REFER TO FIGURE
NOTE
Always operate the control
levers with slow, even pres-
sure.
Figure 4-4. Control Lever Operation
