TM 5-3810-302-10
Position 2/4 WHEEL DRIVE lever (17, figure 4-1 ) to 4-WHEEL.
1.
Shift direction control lever (14) from N (neutral) to F (forward) or R
2.
(reverse).
NOTE
The back-up alarm will not sound unless the
lights switch (43, figure 4-1) is in the STOP
LIGHT mode.
WARNING
THE BACK-UP ALARM SHOULD SOUND
WHEN SHIFTING TO R (REVERSE) TO
ALERT PERSONNEL IN YOUR VICINITY.
IF THE ALARM DOES NOT SOUND,
DEPRESS HORN BUTTON (7). REPAIR
THE BACK-UP ALARM AS SOON AS
PRACTICABLE.
IT IS ADVISABLE TO USE A SPOTTER
WHEN BACKING THE CRANE.
3 . Position shift control lever (13) to 1 (first gear) and release parking
brake.
4 . Daepress the foot throttle apedal (19)
5 . Return the 2/4 WHEEL DRIVE lever (17) to 2-WHEEL as soon as two-
wheel traction will suffice.
STOPPING THE CRANE.
WARNING
NEVER PARK THE CRANE NEAR HOLES,
OR ON ROCKY OR EXTREMELY SOFT
S U R F A C E S . THIS MAY CAUSE THE
CRANE TO OVERTURN, RESULTING IN
INJURY TO PERSONNEL.
Stop the crane as follows:
Release foot throttle pedal (19, figure 4-1) and depress foot brake pedal
1.
(20).
Shift direction control lever (14) to N (neutral).
2.
