4. Use a suitable gear puller to remove
Remove the drive assembly for the belt
the pulley from the drive shaft. Remove
driven type accessory drive as follows:
the Woodruff key.
1. Remove any external piping or con-
5. Remove the five bolts and lock wash-
nections to the accessory.
ers which attach the drive retainer as-
s e m b l y t o t h e f l y w h e e l h o u s i n g . Remove
2. Loosen the accessory and slide it to-
the retainer assembly.
ward the drive pulley. Then remove the
drive belt and the accessory.
6. Remove the accessory drive shaft and
drive plate in a manner similar to that
3.
Remove
the
nut
(Figure
11B-180),
retaining the pulley on the drive shaft.
11B-118