TM5-3810-305-10
Rail Transport
Weight of hook block is approxi-
mately 235 lb (107 kg). Use ade-
quate lifting equipment and
always properly support hook
block. Do not lift over personnel
or let personnel walk underneath
suspended load. Failure to
follow this procedure could cause
DEATH or serious injury.
1. Using hoist and sling, remove the hook block
from the cable. Store it in the tool box and
block it to prevent it from moving.
2.
3.
4.
5.
6.
Retract the boom and lower it over the front.
Wind the cable back on the winch drum, and
wire the socket down to prevent the cable
from loosening on the winch drum.
Install a 1/2 in. 6x19 IWRC cable
around the
load sheave and the hook block tieback.
Refer to TM55-3810-01-165-14,
Transpor-
t a b i l i t y G u i d a n c
e
for the Crane. 7.5
Ton, Rough Terrain, Koehring, Type 1
{NSN 3810-01-165-0646}, Type 2 {NSN
3810-01-165-0467} and the shipping data
p l a t e s f o r t i e d o w n r e q u i r e m e n t s
Place the fuel shut-off on the rear wall of the
cab in the off position. Put the transmission
shift lever in the center (neutral) position, and
release the parking brake.
Remove all loose tools and equipment from
the operators cab. Stow and secure all tools
and equipment in the tool box.
7. Band the tool and battery box lids shut.
4-75
