TM 5-3810-305-23
0046
REMOVAL - Continued
7.
Remove four nuts (Figure 3, Item 8), lockwashers (Figure 3, Item 9), capscrews (Figure 3, Item 7), and two
mounting bands (Figure 3, Item 6) from bracket (Figure 3, Item 3). Discard lockwashers.
8.
Remove two nuts (Figure 3, Item 10), capscrews (Figure 3, Item 2), and bracket (Figure 3, Item 11) from vehicle.
9.
Remove two capscrews (Figure 3, Item 4), washers (Figure 3, Item 5), and bracket (Figure 3, Item 3)
from vehicle.
10.
Remove two nuts (Figure 3, Item 1), lockwashers (Figure 3, Item 14), vehicle screws (Figure 3, Item 13),
and restriction indicator (Figure 3, Item 12) from hood support. Discard lockwashers.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSTALLATION
1.
Install restriction indicator (Figure 3, Item 12), two vehicle screws (Figure 3, Item 13), new lockwashers
(Figure 3, Item 14), and nuts (Figure 3, Item 1) on hood support.
2.
Install bracket (Figure 3, Item 3), two washers (Figure 4, Item 5), and capscrews (Figure 3, Item 4) on vehicle.
3.
Install bracket (Figure 3, Item 11), two capscrews (Figure 3, Item 2), and nuts (Figure 3, Item 10) on vehicle.
4.
Install two mounting bands (Figure 3, Item 6), four capscrews (Figure 3, Item 7), new lockwashers
(Figure 3, Item 9), and nuts (Figure 3, Item 8) to bracket (Figure 3, Item 3).
0046-4
03/15/2011Rel(1.8)root(maintwp)wpno(M00052)