TM 5-3810-305-23
0045
REMOVAL
1.
Disconnect fittings (Figure 1, Items 1 and 2) from lift pump (Figure 1, Item 4).
2.
Remove two capscrews (Figure 1, Item 3), lift pump (Figure 1, Item 4), and gasket (Figure 1, Item 5) from
engine (Figure 1, Item 6). Remove all gasket material from mounting surfaces. Discard gasket.
1
2
6
5
4
3
M0291105
Figure 1.
Lift Pump Removal.
END OF TASK
CLEANING
1.
Clean parts IAW General Maintenance Instructions (WP 0162).
2.
Clean parts and surfaces with solvent cleaning compound.
END OF TASK
INSPECTION
1.
Inspect parts IAW General Maintenance Instructions (WP 0162).
2.
Inspect camshaft lever and return spring for wear.
3.
Inspect diaphragm by blocking fuel inlet line with finger and operating priming lever. A properly operating pump
will have suction that will not bleed down until finger is removed from inlet.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00051)