TM 5-3810-305-23
0052
INSTALLATION - Continued
2.
Install pedal (Figure 7, Item 21), bushing (Figure 7, Item 16), bracket (Figure 7, Item 17), and two new roll pins
(Figure 7, Item 15) on bell crank (Figure 7, Item 6).
3.
Install bearing unit (Figure 7, Item 14) on pedal (Figure 5, Item 21).
4.
Install bell crank (Figure 7, Item 6) and pedal (Figure 8, Item 21) as an assembly and secure with two capscrews
(Figure 8, Item 16), washers (Figure 7, Item 19), and nuts (Figure 7, Item 20).
5.
Install two capscrews (Figure 7, Item 11), washers (Figure 7, Item 12), and nuts (Figure 7, Item 13).
6.
Install hook (Figure 7, Item 10), new lockwasher (Figure 7, Item 9) and nut (Figure 7, Item 8).
7.
Install spring (Figure 7, Item 7) on yoke (Figure 7, Item 3) and hook (Figure 7, Item 10).
8.
Install throttle cable (Figure 7, Item 1) and push through opening in cab. Position throttle cable in weldment
and tighten nut (Figure 7, Item 22).
9.
Install end yoke (Figure 7, Item 3), if removed, and secure with nut (Figure 7, Item 2). Install to distance
as marked.
10.
Install pin (Figure 7, Item 4) and new cotter pin (Figure 7, Item 5) to attach bell crank (Figure 7, Item 6) and
end yoke (Figure 7, Item 3).
2
3
1
4
22
21
5
6
7
20
19
8
12
14
18
10
15
11
9
17
13
16
M0544105
Figure 7. Throttle Control Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00058)