TM 5-3810-305-23
FIELD MAINTENANCE
COOLING FAN AND HUB ASSEMBLY MAINTENANCE
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Solvent Cleaning Compound Type III (WP 0170,
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
Table 1, Item 9) Qty: 1
Fixture, Arbor Press (WP 0171, Table 1, Item 1)
Washer, Lock M8 (WP 0172, Table 1, Item 126)
Vise (WP 0171, Table 1, Item 44)
Qty: 4
Wrench, Torque, Click, Ratcheting 3/8 Inch Drive,
75 ft-lb (WP 0171, Table 1, Item 36)
References
Materials/Parts
Grease, Molybdenum (WP 0170, Table 1, Item
Equipment Condition
27) Qty: 1
Boom in horizontal position and fully retracted
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
(TM 5-3810-305-10)
Drive belt tensioner and idler removed (hub
assembly only) (WP 0061)
REMOVAL
1.
Remove four capscrews (Figure 1, Item 2), lockwashers (Figure 1, Item 1), and fan (Figure 1, Item 3) from
vehicle. Discard lockwashers.
1
2
3
M0007105_2
Figure 1. Cooling Fan Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00066)