TM 5-3810-305-23
0058
INSTALLATION
1.
Install new o-ring (Figure 3, Item 1) in groove on water pump (Figure 3, Item 3).
2.
Install water pump (Figure 3, Item 3) and two capscrews (Figure 3, Item 2) on engine. Tighten two capscrews
to 18 ft-lb (24 Nm).
1
2
3
M0300105
Figure 3.
Water Pump Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install drive belt (WP 0059).
2.
Connect battery cables (WP 0076).
3.
Fill with coolant (TM 5-3810-305-10).
4.
Run engine until normal operating temperature is reached (TM 5-3810-305-10).
5.
Check for leaks.
6.
Place boom in resting position (TM 5-3810-305-10).
7.
Shut down engine (TM 5-3810-305-10).
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00064)
