TM 5-3810-305-23
0066
INSTALLATION - Continued
Dash Panel - Continued
NOTE
Install wires as tagged during removal.
7.
Installation of three dash lights: Install light bulb (Figure 26, Item 4) and filter in socket.
8.
Connect wires (Figure 26, Item 7) and push socket (Figure 26, Item 6) through dash panel
(Figure 26, Item 1) and install internal tooth washer (Figure 26, Item 3) and nut (Figure 26, Item 2).
Install cover (Figure 26, Item 5).
9.
Use same procedure to install remaining two dash lights.
10.
Install light bulb (Figure 26, Item 12) and filter (Figure 26, Item 11) in socket (Figure 26, Item 10).
11.
Push gage (Figure 26, Item 8) through dash panel (Figure 26, Item 1).
12.
Install bracket (Figure 26, Item 13), two washers (Figure 26, Item 14) and nuts (Figure 26, Item 15).
Connect wires (Figure 26, Item 9) on gage (Figure 26, Item 8).
1
7
2,3,4,5
6
8
9
15
14 13 12 11 10
M0501105
Figure 26.
Dash Panel Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00072)
