TM 5-3810-305-23
0066
INSTALLATION - Continued
Right Console - Continued
6.
Rotate right console (Figure 30, Item 12) 1/4 turn and position it in cab.
7.
Install two washers (Figure 30, Item 5), new lockwasher (Figure 30, Item 4), and capscrew (Figure 30, Item 3)
on dash (Figure 30, Item 12).
8.
Install but DO NOT TIGHTEN washers (Figure 30, Item 2), capscrews and nuts (Figure 30, Item 1),
cover (Figure 30, Item 18), washers (Figure 30, Item 15), new lockwashers (Figure 30, Item 16), capscrews
(Figure 30, Item 17), three washers (Figure 30, Item 10), capscrews (Figure 30, Item 9), nuts
(Figure 30, Item 11), four washers (Figure 30, Item 13) and nuts (Figure 30, Item 14).
9.
Tighten capscrews and nuts (Figure 30, Item 1), capscrews (Figure 30, Item 17), capscrews
(Figure 30, Item 9), and nuts (Figure 30, Item 14).
10.
Install circuit breaker panel (Figure 30, Item 8), four new lockwashers (Figure 30, Item 7), and capscrews
(Figure 30, Item 6). If circuit breaker panel was completely removed, refer to Circuit Breaker Panel in this
work package.
11.
Install seat (WP 0124).
8
6,7
3,4,5
9,10
1,2
11
12
18
13,14
15,16,17
M0512105
Figure 30.
Right Console Installation.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00072)
