TM 5-3810-305-23
0072
REMOVAL
Left Front Lights and Bracket
WARNING
Remove jewelry and disconnect battery negative ground cable before performing
maintenance on this equipment. Failure to follow this warning may result in injury or death
to personnel.
NOTE
Tag all wires and electrical connectors to aid in installation.
1.
Disconnect electrical connectors (Figure 1, Items 7, 15 and 16) from blackout lamp (Figure 1, Item 3),
headlight (Figure 1, Item 19), and turn signal (Figure 1, Item 2).
2.
Remove nut (Figure 1, Item 4), lockwasher (Figure 1, Item 5), ground wire (Figure 1, Item 6), and blackout
lamp (Figure 1, Item 3) from bracket (Figure 1, Item 18). Discard lockwasher.
3.
Remove nut (Figure 1, Item 8), lockwasher (Figure 1, Item 9), ground wire (Figure 1, Item 10), turn signal
(Figure 1, Item 2), and washer (Figure 1, Item 1) from bracket (Figure 1, Item 18). Discard lockwasher.
4.
Remove nut (Figure 1, Item 22) and lockwasher (Figure 1, Item 21) from headlight (Figure 1, Item 19) base.
Discard lockwasher.
5.
Remove headlight (Figure 1, Item 19) and washer (Figure 1, Item 20) from bracket (Figure 1, Item 18).
6.
Remove four nuts (Figure 1, Item 11), lockwashers (Figure 1, Item 12), capscrews (Figure 1, Item 13), and left
front bracket (Figure 1, Item 18) from vehicle. Discard lockwashers.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
1.
Inspect parts IAW General Maintenance Instructions (WP 0162).
2.
Inspect grommet (Figure 1, Item 14) and rubber bumper (Figure 1, Item 17) IAW General Maintenance
Instructions (WP 0162). If damaged, replace.
END OF TASK
0072-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00078)