TM 5-3810-305-23
0072
FOLLOW-ON MAINTENANCE
1.
Connect battery cables (WP 0076).
2.
Place boom in resting position (TM 5-3810-305-10).
3.
Check for proper operation.
END OF TASK
REMOVAL
Right Front Lights and Bracket
WARNING
Remove jewelry and disconnect battery negative ground cable before performing
maintenance on this equipment. Failure to follow this warning may result in injury or death
to personnel.
NOTE
Tag and identify all wires and electrical connectors to aid in installation.
1.
Disconnect electrical connectors (Figure 2, Items 7 and 10) from headlight (Figure 2, Item 16) and turn signal
(Figure 2, Item 2).
2.
Remove nut (Figure 2, Item 4), lockwasher (Figure 2, Item 5), ground wire (Figure 2, Item 6), turn signal
(Figure 2, Item 2), and washer (Figure 2, Item 3) from right front bracket (Figure 2, Item 1). Discard lockwasher.
3.
Remove nut (Figure 2, Item 11) and lockwasher (Figure 2, Item 12) from headlight (Figure 2, Item 16) base.
Discard lockwasher.
4.
Remove headlight (Figure 2, Item 16) and washer (Figure 2, Item 9) from right front bracket (Figure 2, Item 1).
5.
Remove four nuts (Figure 2, Item 13), lockwashers (Figure 2, Item 14), capscrews (Figure 2, Item 15), and
right front bracket (Figure 2, Item 1) from vehicle. Discard lockwashers.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
1.
Inspect parts IAW General Maintenance Instructions (WP 0162).
2.
Inspect grommet and rubber bumper IAW General Maintenance Instructions (WP 0162). If damaged, replace.
END OF TASK
0072-4
03/15/2011Rel(1.8)root(maintwp)wpno(M00078)
