TM 5-3810-305-23
0111
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSTALLATION
1.
Install hose (Figure 2, Item 1) on elbow (Figure 2, Item 3) and tee (Figure 2, Item 23).
2.
Install hose (Figure 2, Item 25) on elbow (Figure 2, Item 3) and tee (Figure 2, Item 23).
3.
Install hoses (Figure 2, Item 24) on elbow (Figure 2, Item 3) and tee (Figure 2, Item 23).
4.
Install hose (Figure 2, Item 1) on elbow (Figure 2, Item 3) and tee (Figure 2, Item 23).
5.
Install hose (Figure 2, Item 1) on elbow (Figure 2, Item 3) and tee (Figure 2, Item 23).
6.
Install hose (Figure 2, Item 25) on elbow (Figure 2, Item 3) and tee (Figure 2, Item 23).
7.
Install hose (Figure 2, Item 24) on elbow (Figure 2, Item 3) and tee (Figure 2, Item 23).
8.
Install two clamps (Figure 2, Item 22).
9.
Install hose (Figure 2, Item 3) on elbow (Figure 2, Item 2) and tee (Figure 2, Item 23).
10.
Install hose (Figure 2, Item 11) on tee (Figure 2, Item 23) and adapter (Figure 2, Item 19).
11.
Install two clamps (Figure 2, Item 8).
12.
Install hose (Figure 2, Item 25) on tee (Figure 2, Item 24) and adapter (Figure 2, Item 19).
13.
Install three clamps (Figure 2, Item 8), four clamps (Figure 2, Item 4), and new tiedown straps
(Figure 2, Item 10).
14.
Install hose (Figure 2, Item 12) on elbow (Figure 2, Item 17) and tee (Figure 2, Item 24).
15.
Install six clamps (Figure 2, Item 8), four clamps (Figure 2, Item 4), and new tiedown straps (Figure 2, Item 10)
as required.
16.
Install hose (Figure 2, Item 20) on tee (Figure 2, Item 17) and steering valve.
17.
Install hose (Figure 2, Item 21) on tee (Figure 2, Item 23) and steering valve.
18.
Install clamp (Figure 2, Item 4) and five clamps (Figure 2, Item 8).
19.
Close dipstick cap.
0111-4
03/15/2011Rel(1.8)root(maintwp)wpno(M00124)
