TM 5-3810-305-23
0112
INSTALLATION
1.
Install steering cylinder (Figure 2, Item 8) and four washers (Figure 2, Item 7) on vehicle.
2.
Install two pins (Figure 2, Item 1) on steering cylinder assembly (Figure 2, Item 8).
3.
Install two washers (Figure 2, Item 2) and capscrews (Figure 2, Item 3) on steering cylinder
assembly (Figure 2, Item 8).
4.
Install two new o-rings (Figure 2, Item 5) and elbows (Figure 2, Item 4) on steering cylinder
assembly (Figure 2, Item 8).
5.
Connect two hydraulic lines (Figure 2, Item 6) to elbows (Figure 2, Item 4).
6.
Close dipstick cap.
6
4
1
4
5
5
2,3
1
2,3
7
7
8
7
M0459105
Figure 2. Steering Cylinders Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Connect battery cables (WP 0076).
2.
Check hydraulic oil level. Fill to proper level, if necessary (TM 5-3810-305-10).
3.
Place boom in resting position (TM 5-3810-305-10).
4.
Check for proper operation.
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00125)