TM 5-3810-305-23
0117
INSTALLATION - Continued
7.
Install spacer plate (Figure 11, Item 6), inside latch (Figure 11, Item 1), four screws (Figure 11, Item 2),
and inside handle (Figure 11, Item 5) on door (Figure 11, Item 4).
8.
Install roll pin (Figure 11, Item 3) to secure inside handle (Figure 11, Item 5).
3
2
4
1
6
5
M0575105
Figure 11. Cab Door Installation.
9.
Install spacer plate (Figure 12, Item 5), hinges (Figure 12, Item 4), two capscrews (Figure 11, Item 1), new
lockwashers (Figure 11, Item 2), washers (Figure 11, Item 6), and nuts (Figure 11, Item 7) on doorway.
10.
Lift door (Figure 12, Item 3) over pins on hinges (Figure 12, Item 4) and align hinges.
Lower door (Figure 11, Item 1) onto hinge pins.
03/15/2011Rel(1.8)root(maintwp)wpno(M00130)