TM 5-3810-305-23
0119
INSTALLATION - Continued
6.
If removed, install new seals (Figure 8, Item 5). Seal ends of seals together with silicone sealant.
WARNING
Weight of cab is approximately 250 lb (113 kg). Use adequate lifting equipment to lift and
support cab. DO NOT lift over personnel or let personnel walk underneath suspended load.
Failure to follow this warning may cause injury or death to personnel.
7.
Using a hoist with sling through door and window openings, position cab (Figure 8, Item 2) mounting holes
over studs in frame and install cab to vehicle.
8.
Secure defroster fan harness (Figure 8, Item 6) to cab (Figure 8, Item 2) with two clamps (Figure 8, Item 7),
capscrews (Figure 8, Item 8), and nuts (Figure 8, Item 1).
9.
Install 18 washers (Figure 8, Item 4) and new locknuts (Figure 8, Item 3) to cab (Figure 8, Item 2).
1
2
8
7
3
7
4
8
7
6
5
M0587105
Figure 8. Cab Assembly Installation.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00132)
