TM 5-3810-305-23
0120
INSTALLATION - Continued
2.
Connect restriction indicator hose (Figure 3, Item 15) to restriction indicator (Figure 3, Item 14).
3.
Install stack cap (Figure 3, Item 5), 90 degree elbow (Figure 3, Item 8), and T-bolt clamp (Figure 3, Item 9) as
an assembly and tighten nut (Figure 3, Item 10) on T-bolt clamp.
4.
Install U-bolt (Figure 3, Item 7) and two new locknuts (Figure 3, Item 6) on hood support.
5.
Install two clamps (Figure 3, Item 2), spacer (Figure 3, Item 3), plate (Figure 3, Item 1), capscrew
(Figure 3, Item 4), and nut (Figure 3, Item 13) on hoses (Figure 3, Items 11 and 12).
23
1
4
5
13
12
6
15
11
7
14
8
10
9
M0581105
Figure 3. Hood Support Installation.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00133)