TM 5-3810-305-23
0126
DISASSEMBLY - Continued
11.
Remove six pocket seals (Figure 9, Item 3) and gasket seal (Figure 9, Item 2) from gear housing
(Figure 9, Item 4). Discard pocket seals and gasket seals.
12.
Remove port end cover (Figure 9, Item 1) from gear housing (Figure 9, Item 4).
13.
Remove remaining six pocket seals (Figure 9, Item 3) and gasket seal (Figure 9, Item 2) from gear housing
(Figure 9, Item 4). Discard pocket seals and gasket seals.
2
4
3
1
2
3
M0631105
Figure 9. Winch Motor Disassembly.
NOTE
Matchmark thrust plates to gear housing.
14.
Remove two thrust plates (Figure 10, Item 1) by tapping on shafts (Figure 10, Item 3) to unseat thrust plates.
15.
Remove two shafts (Figure 10, Item 3) from gear housing (Figure 10, Item 2).
3
2
1
1
M0632105
Figure 10. Winch Motor Disassembly.
16.
Inspect four dowel pins (WP 0162).
03/15/2011Rel(1.8)root(maintwp)wpno(M00143)
