TM 5-3810-305-23
0126
ASSEMBLY - Continued
9.
Install new gasket seal (Figure 22, Item 2) and six new pocket seals (Figure 22, Item 3) in gear
housing (Figure 22, Item 4).
10.
Install port end cover (Figure 22, Item 1) on gear housing (Figure 22, Item 4) as matchmarked
during disassembly.
11.
Install remaining thrust plate (Figure 22, Item 4) as matchmarked in gear housing (Figure 22, Item 4).
Thrust plate is installed flush with gear housing.
12.
Install new gasket seal (Figure 22, Item 2) and remaining six new pocket seals (Figure 22, Item 3) in gear
housing (Figure 21, Item 4).
2
4
3
1
2
3
M0631105
Figure 22.
Winch Motor Assembly.
13.
Install shaft end cover (Figure 23, Item 1) as matchmarked on motor (Figure 23, Item 2).
1
2
M0630105
Figure 23.
Winch Motor Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00143)
