TM 5-3810-305-23
0127
REMOVAL
NOTE
Elbows come with o-rings installed.
1.
Remove elbow (Figure 1, Item 11), o-ring (Figure 1, Item 10), ball (Figure 1, Item 9), and spring
(Figure 1, Item 8) from housing (Figure 1, Item 23). Discard elbow and o-ring.
2.
Remove elbow (Figure 1, Item 14), o-ring (Figure 1, Item 13), and pilot orifice (Figure 1, Item 12) from housing
(Figure 1, Item 23). Discard elbow and o-ring.
3.
Remove spring retainer (Figure 1, Item 4), o-ring (Figure 1, Item 5), and spring (Figure 1, Item 6) from housing
(Figure 1, Item 23). Discard o-ring.
4.
Remove cap plug (Figure 1, Item 18), damper piston (Figure 1, Item 7), and spool (Figure 1, Item 15) as a unit
from housing (Figure 1, Item 23).
5.
Remove back-up ring (Figure 1, Item 17) and o-ring (Figure 1, Item 16) from spool (Figure 1, Item 15).
Discard o-ring.
6.
Separate damper piston (Figure 1, Item 7) from spool (Figure 1, Item 15).
7.
Remove back-up ring (Figure 1, Item 2) and o-ring (Figure 1, Item 3) from damper piston (Figure 1, Item 7).
Discard o-ring.
8.
Remove spring retainer (Figure 1, Item 19), o-ring (Figure 1, Item 20), spring (Figure 1, Item 21), check valve
poppet (Figure 1, Item 22), and plug (Figure 1, Item 1) from housing (Figure 1, Item 23). Discard o-ring.
0127-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00142)
