TM 5-3810-305-23
0149
REMOVAL - Continued
WARNING
Weight of boom hoist cylinder is approximately 507 lb (230 kg). Use adequate lifting
equipment to lift and support boom hoist cylinder. DO NOT lift over personnel or let personnel
walk underneath suspended load. Failure to follow this warning may cause injury or death to
personnel.
3.
Secure boom hoist cylinder (Figure 1, Item 4) in lifting device. Remove capscrew (Figure 1, Item 1), lockwasher
(Figure 1, Item 2), rod eye (Figure 1, Item 3). and pin (Figure 1, Item 5) from rod end of boom hoist cylinder.
Discard lockwasher.
3
1,2
5
4
M0427105
Figure 1. Boom Hoist Cylinder Removal.
4.
Retract boom hoist cylinder (Figure 1, Item 4) by pushing boom hoist lever and retracting boom hoist cylinder
approximately 6 inch (152 mm). Shut engine OFF.
WARNING
Never disconnect hydraulic lines or fittings before venting pressure. Turn dipstick cap 1/4 turn
to safety notch to relieve pressure. Failure to follow this warning may cause death or injury
to personnel.
03/15/2011Rel(1.8)root(maintwp)wpno(M00165)
