TM 5-3810-305-23
0148
REMOVAL - Continued
CAUTION
Wipe area clean around all connections to be opened during removal. Cap lines and
hoses and plug openings after removing lines. Contamination of system could result in
premature failure.
NOTE
Tag hoses prior to removal to ensure correct installation.
1.
Turn dipstick cap 1/4 turn to safety notch to relieve pressure.
2.
Remove spin-on filter element (Figure 1, Item 22) from filter head (Figure 1, Item 3), letting oil drain
into container.
3.
Remove hose (Figure 1, Item 10), elbow (Figure 1, Item 11), and o-ring (Figure 1, Item 12). Discard o-ring.
4.
Remove hose (Figure 1, Item 13), elbow (Figure 1, Item 14), and o-ring (Figure 1, Item 15). Discard o-ring.
5.
Remove hose (Figure 1, Item 19), elbow (Figure 1, Item 20), and o-ring (Figure 1, Item 21). Discard o-ring.
6.
Remove check valve (Figure 1, Item 16), adapter (Figure 1, Item 17), and o-ring (Figure 1, Item 18) from
manifold (Figure 1, Item 7). Discard o-ring.
7.
Remove dust cap (Figure 1, Item 5) and nipple (Figure 1, Item 6).
8.
Remove four capscrews (Figure 1, Item 8), lockwashers (Figure 1, Item 9), manifold (Figure 1, Item 7),
and o-ring (Figure 1, Item 4) from filter head (Figure 1, Item 3). Discard lockwashers and o-ring.
9.
Remove four capscrews (Figure 1, Item 1), o-ring (Figure 1, Item 2), and filter head (Figure 1, Item 3)
from manifold (Figure 1, Item 23). Discard o-ring.
0148-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00164)
