TM 5-3810-305-23
0149
DISASSEMBLY - Continued
CAUTION
Removal of bushings may cause destruction of bushings. Remove bushings only if inspection
indicates replacement is necessary.
12.
Remove four bushings (Figure 8, Item 1) if inspection deems necessary.
1
1
M0434105
Figure 8. Boom Hoist Cylinder Disassembly.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
1.
Inspect parts IAW General Maintenance Instructions (WP 0162).
2.
Inspect all parts for wear, pitting, cracks, or corrosion and replace if necessary.
3.
Inspect boom hoist cylinder bushing. Maximum I.D. is 2.543 inch (64.59 mm). If I.D. is more than limit, replace
boom hoist cylinder bushing.
4.
Inspect boom hoist cylinder base pin. Minimum O.D. is 2.474 inch (62.84 mm). If O.D. is less than limit, replace
boom hoist cylinder base pin.
5.
Inspect all other parts.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00165)
