TM 5-3810-306-10
TABLE 3-1. OPERATOR TROUBLESHOOTING (CONTD)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
48 ERROR CODE E01 ON LMI MOMENT DISPLAY
Step 1.
Minimum radius or maximum angle exceeded due to raising the boom too far.
a. Lower boom to a radius or angle given in the load chart. Refer to Appendix F.
Step 2.
Load moment indicator system malfunction.
a. Contact Direct Support Maintenance.
49. ERROR CODE E02 ON LMI MOMENT DISPLAY
Step 1.
Maximum radius or minimum angle exceeded due to lowering boom too far.
a. Raise boom to a radius or angle given in the load chart. Refer to Appendix F.
Step 2.
Load moment indicator system malfunction.
a. Contact Direct Support Maintenance.
50. ERROR CODE E04 ON LMI MOMENT DISPLAY
Step 1.
Operating mode switches on console set incorrectly.
a. Set operating mode switches to match operation mode of crane. Refer to Table 2-2.
Step 2.
Load moment indicator system malfunction.
a. Contact Direct Support Maintenance.
3-23
