TM 5-3810-306-10
Table 2-2. Load Moment Indicator (Cont’d)
Key
Control or Indicator
Function
NOTE
At 100% of rated capacity, hoist up, boom down and
telescope out functions will be locked out.
WARNING
Ensure that when performing craning operations on
rubber (i.e. without extending the outriggers) the ON
OUTRIGGERS/ON RUBBER selector switch is set to ON
RUBBER. Otherwise the load moment indicator will show
craning values that are not accurate. Failure to follow
this procedure could result in personnel injury and/or
equipment damage.
9
ON OUTRIGGERS/ON RUBBER
ON OUTRIGGERS -Select this
Selector switch position
when operating crane on
outriggers (i.e. outriggeres
lowered and extended).
ON RUBBER - Select this
position when operating
crane on rubber (i.e. with
outrigger up and retracted).
WARNING
Ensure that when performing pick and carry operations
(i.e. moving the crane while lifting a load) the
STATIONARY/PICK & CARRY switch is set at PICK &
CARRY. Otherwise, the load moment indicator will show
craning values that are not accurate. Failure to follow
these procudures could result in personnel injury and/or
equipment damage.
2-13
