TM 5-3810-306-10
OPERATOR PMCS (CONTD)
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE: CHECK FOR AND HAVE
EQUIPMENT IS NOT
NO
B
D
A
W
M
REPAIRED FILLED, OR ADJUSTED. . .
READY/AVAILABLE IF:
13
HOOK BLOCK AND OVERHAUL BALL
.
a.
Check hook block for cracks
Cracks, damage or
deformation and damaged
deformation are
hook latch.
detected. Hook
catch missing
or inoperative.
.
b.
Check overhaul ball for cracks,
Cracks, damage or
deformations and damaged
deformation are
hook latch.
detected. Hook
catch missing or
inoperative.
WARNING
Do not touch sheave edge. Visually
check the edge for sharpness.
14
SHEAVES
.
Check sheaves for sharp edges/cracks.
Sharp edges, cracks
Edges are sharp if cable shows sign
are detected.
of fraying or cuts.
15
TOOL BOX
Ensure that emergency load lowering
hoses (3) and pump handle are stowed.
Ensure that drain pan is stowed.
16
HYDRAULIC RESERVOIR
CAUTION
Ensure all hydraulic cylinders are
fully retracted when checking
hydraulic fluid level.
.
Check hydraulic oil level (on right
Oil level low;
side of crane). Maintain oil level
Class III leaks
at "Full" mark on reservoir sight
exist.
gauge.
2-20
