TM 5-3810-306-10
OPERATOR PMCS (CONTD)
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE: CHECK FOR AND HAVE
EQUIPMENT IS NOT
NO
B
D
A
W
M
REPAIRED FILLED, OR ADJUSTED. . .
READY/AVAILABLE IF:
e.
Air pressure gauge: Minimum
Outside normal
.
105 psi, maximum 120 psi.
range.
.
f.
LED Alert Display: Check that
Any one light
all lights illuminate during
does not light.
engine start-up.
23
STEERING
.
Check steering, front and rear for
No or rough
smooth and proper operation.
steering is
detected.
WARNING
Retract all outrigger stabilizers
and beams to perform the following
inspections.
24
BRAKES, SERVICE AND PARKING
.
a.
Check for forward or reverse
Any movement of
motion of vehicle withvehicle.
parking brake applied.
.
b.
Check/listen for noise and
Chattering, grinding
stopping ability with vehicle
or inability to
moving in either a slowstop.
forward motion or a slow
reverse motion when applying
the brakes.
25
LOAD MOMENT INDICATOR
WARNING
.
Tests for the Load Moment Indicator
One test fails.
(LMI) system must be performed with
care to prevent damage to the
machine or injury to personnel.
Proper functioning of the system
requires successful completion of
the following tests. (Refer to
table 2-2.)
2-24
