TM 5-3810-306-20DISTRIBUTION PANEL INSTALLATIONTOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)SUPPLIES: Lockwashers (Item 7, Appendix C) (4 Required)EQUIPMENT CONDITION: Disconnect ground cable at shunt. (Refer to page 8-109.)Front side access panel removed. (Refer to page 8-21.)REMOVAL:1. REMOVE DISTRIBUTION PANEL (1).a.Tag and disconnect electrical connectors ondistribution panel wiring harness.b.Tag and disconnect black wires.c.Remove four nuts (3), lockwashers (4) andflatwashers (2) securing distribution panel (1) onmounting studs. Discard lockwashers (4).d.Remove panel (1).INSTALLATION:1. INSTALL DISTRIBUTION PANEL (1).a.Position distribution panel holes on mountingstuds and secure with flatwashers (2),lockwashers (4) and nuts (3).b.Connect tagged black wires.c.Connect five tagged electrical connectors todistribution panel.2.INSTALL FRONT SIDE ACCESS PANEL. (REFERTO PAGE 8-21.)3.CONNECT GROUND CABLE AT SHUNT. (REFERTO PAGE 8-109.)END OF TASK8-30
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
