TM 5-3810-306-20
CLEARANCE LIGHT REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
Lockwashers (Item 51, Appendix C)
EQUIPMENT CONDITION:
Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE CLEARANCE LIGHT.
a.
Pry off reflective lens (1).
b.
Remove two screws (2), flatwashers (3) and
outrigger cover (4).
NOTE
Ensure covers (4) stay with same
outrigger.
c.
Tag and remove wire from clearance light (8).
b.
Remove two screws (5), lockwashers (6) and
nuts (7). Discard lockwashers (6).
c.
Remove clearance light back plate (8) from
cover (4).
d.
Replace bulb (9) if damaged.
INSTALLATION:
1.
INSTALL CLEARANCE LIGHT.
a.
Align clearance light back plate (8) with
mounting holes and secure with two screws (5),
new lockwashers (6) and nuts (7).
NOTE
Amber lenses are used on front
clearance lights and red lenses on
rear clearance lights.
b.
Install reflective lens (1).
c.
Remove tag. Connect electrical wire to
clearance light.
d.
Align outrigger cover holes on end of outrigger
and secure with two flatwashers (3) and screws
(2).
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
TEST
CLEARANCE
LIGHTS
FOR
PROPER
OPERATION. (REFER TO TM 5-3810-306-10.)
END OF TASK
8-43
