LOW OIL PRESSURE SWITCH REPLACEMENT

Section V. SENDING UNITS AND SWITCHES MAINTENANCE

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
201

TM 5-3810-306-20 LOW OIL PRESSURE SWITCH REPLACEMENT TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033) SUPPLIES: None EQUIPMENT CONDITIONS: Right engine access door open. Engine cool to touch. Disconnect ground cable at shunt. (Refer to page 8-109.) REMOVAL: 1. REMOVE LOW OIL PRESSURE SENDER (1). a. Tag and disconnect electrical connector(s) to pressure sender (1). b. Turn pressure sender (1) counter-clockwise and remove from engine. Plug hole in engine. INSTALLATION: 1. INSTALL LOW OIL PRESSURE SENDER (1). a. Remove plug and screw pressure sender (1) into engine. b. Remove tag and connect electrical connector(s) to pressure sender (1). 2. CONNECT GROUND CABLE AT SHUNT. (REFER TO PAGE 8-109.) 3. START ENGINE. CHECK FOR PROPER OPERATION OF AFFECTED COMPONENT. (REFER TO TM 5-3810-306-10.) END OF TASK 8-47

Privacy Statement
Press Release
Contact