Section V. SENDING UNITS AND SWITCHES MAINTENANCE

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
200

TM 5-3810-306-20 Section V. SENDING UNITS AND SWITCHES MAINTENANCE OIL PRESSURE SENDER REPLACEMENT TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033) SUPPLIES: None EQUIPMENT CONDITIONS: Right engine access door open. Engine cool to touch. Disconnect ground cable at shunt. (Refer to page 8-109.) REMOVAL: 1. REMOVE OIL PRESSURE SENDER (1). a. Tag and disconnect electrical connector(s) to pressure sender (1). b. Turn pressure sender (1) counter-clockwise and remove from engine. Plug hole in engine. INSTALLATION: 1. INSTALL OIL PRESSURE SENDER (1) a. Remove plug and screw pressure sender (1) into engine. b. Remove tag and connect electrical connector(s) to pressure sender (1). 2. CONNECT GROUND CABLE AT SHUNT. (REFER TO PAGE 8-109.) 3. START ENGINE. CHECK FOR PROPER OPERATION OF AFFECTED COMPONENT. (REFER TO TM 5-3810-306-10.) END OF TASK 8-46

Privacy Statement
Press Release
Contact