TM 5-3810-306-20
d. Install air hoses to brake chamber as tagged
during removal.
3.
UNCAGE SPRING IN BRAKE CHAMBER.
a. Loosen nut (3) on caging bolt (2) to uncage
spring in brake chamber.
b. Remove nut (3) and washer (4) from caging bolt
(2). Turn caging bolt (2) one quarter turn to
remove from brake chamber.
c. Install caging bolt (2), washer (4) and nut (3) in
holding hole on side of brake chamber. Install
rubber cap (5) in hole in brake chamber.
4.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
5.
CHECK FOR PROPER OPERATION. (REFER TO
TM 5-3810-306-10.) INSPECT FOR LEAKS.
END OF TASK
11-6
