TM 5-3810-306-20
Section II. AIR SYSTEM MAINTENANCE
AIR DRYER REPLACEMENT
TOOLS:
General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
Lockwashers (Item 15, Appendix C) (6 Required)
EQUIPMENT CONDITIONS: Crane wheels are chocked.
Air system is purged. (Refer to page 11-2.)
Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE AIR DRYER (1).
a. Tag and disconnect air lines on air dryer (1).
Plug air lines.
b. Tag and disconnect two electrical leads from
bottom of air dryer (1).
NOTE
It may be-necessary to back off bolt
(10) prior to removing nuts (9).
c. Remove four nuts (9), lockwashers (8) and
flatwashers (7) to free air dryer (1) from chassis
frame mounting studs. Discard lockwashers (8).
d. Remove two long capscrews (10), lockwashers
(5) and nuts (4) from two mounting brackets (3).
Discard lockwashers (5).
e. Remove inlet (11), outlet (2) port fittings and
pressure relief fitting (6). Retain for installation
or replace if damaged.
11-12
