TM 5-3810-306-20
capscrews
(3
and
7)
and
new
lockwashers (4 and 6).
3.
INSTALL
PROPELLER
SHAFT
BETWEEN
TRANSMISSION YOKE AND CENTER BEARING
YOKE.
a. Install center bearing (16) on yoke assembly
(15).
b. Align timing marks and insert yoke assembly
(15) onto yoke spline (11). Tap gently until yoke
seats properly.
c. Install nut (14) on spline (11) to secure yoke
assembly (15). Torque to 750 ft-lbs (997 Nm).
d. Install cross and bearing (10) on yoke spline
flange using four capscrews (12) and new
lockwashers (13).
4.
INSTALL PROPELLER SHAFT BETWEEN FRONT
AXLE
YOKE
AND
TRANSMISSION
YOKE.
(REFER TO PAGE 10-2.)
5.
TEST FOR PROPER OPERATION. (REFER TO
TM 5-3810-306-10.) END OF TASK
10-6
