TM 5-3810-306-20
INSTALLATION:
1.
INSTALL AIR DRYER (1).
a. Install mounting bracket (3) on air dryer (1).
Secure with two long capscrews (10), new
lockwashers (5) and nuts (4).
b. Install inlet (11), outlet (2) port fittings and
pressure relief valve (6).
c. Support air dryer (1) and align mounting bracket
(3) on chassis frame mounting studs. Secure
with four flatwashers (7), new lockwashers (8)
and nuts (9).
d. Remove tags, plugs and connect air lines to air
dryer (1).
e. Remove tags and connect electrical leads to air
dryer (1).
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
START-UP ENGINE AND ALLOW AIR PRESSURE
TO BUILD UP. (REFER TO TM 5-3810-306-10.)
4.
CHECK
ALL
AIR
OPERATED
FUNCTIONS.
(REFER TO TM 5-3810-306-10.)
END OF TASK
11-13
