TM 5-3810-306-20
Section II. OUTRIGGER FLOAT MAINTENANCE
OUTRIGCER FLOAT ASSEMBLY
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
Lifting device
SUPPLIES:
None
EQUIPMENT CONDITIONS: Outrigger float removed. (Refer to TM 5-3810-306-10.)
DISASSEMBLY:
1.
DISASSEMBLE OUTRIGGER FLOAT(S) (1).
a.
Remove two self-tapping screws (2) securing
clamps (3).
b.
Drive out two spring pins (4) and remove levers
(5) and springs (6).
c.
Remove two hex locknuts (7), flatwashers (8)
and quick release pin chains (9) secured to
studs (10).
2.
INSPECT ALL PARTS FOR DAMAGE. REPLACE
PARTS AS REQUIRED.
REASSEMBLY:
1.
REASSEMBLE OUTRIGGER FLOAT(S) (1).
a.
Assemble two levers (5), springs (6) and secure
to outrigger float (1) with spring pins (4).
b.
Install clamps (3) and secure with two self-
tapping screws (2).
c.
Attach two quick release pin chains (9) to studs
(10) and secure with hex locknuts (7) and
flatwashers (8).
END OF TASK
14-5/14-6 Blank
