TM 5-3810-306-20
DOME LIGHT REPLACEMENT
TOOLS:
General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES: Lockwashers (Item 70, Appendix C) (3 Required)
Bulb (Item 69, Appendix C)
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Acoustical foam removed in top rear of cab. (Refer to page 15-2.)
REMOVAL:
1.
REMOVE DOME LIGHT ASSEMBLY (1).
a. Remove three screws (1) securing lens cap (2)
to mounting plate (3).
b. Remove bulb (4). Discard and replace if
damaged.
c. Remove three screws (5), lockwashers (6) and
nuts (7) securing mounting plate (3) to cab
frame. Discard lockwashers (6).
d. Tag and disconnect electrical connector (8).
e. Remove dome light assembly.
f.
If lens (9) needs replacement, remove retaining
clip (10) and remove lens (9).
INSTALLATION:
1.
INSTALL DOME LIGHT ASSEMBLY (1).
a. Remove tag and connect electrical lead to light
(8).
b. Align mounting plate (3) with mounting holes and
secure with three machine screws (5), new
lockwashers (6) and nuts (7).
c. Install new bulb (4), if required.
15-36
