TM 5-3810-306-20
f.
Remove fuel filter (12) and pipe nipple (13) from
fuel tank. Retain pipe nipple (13) for installation
on new fuel tank (1).
INSTALLATION:
1.
INSTALL CAB HEATER FUEL TANK (1).
a. Install fuel nipple (13) and fuel filter (12) on fuel
tank (1).
b. Align mounting bracket holes with mounting
studs on frame and secure with nuts (8) and new
lockwashers (9).
c. Assemble fuel tank (1) with two straps (7) and
position on mounting brackets (10).
d. Remove fuel plug on fuel supply line (5) and
install to fuel hose and fuel filter (12). Secure
with two hose clamps (3).
e. Fill fuel tank (1) with fuel, open petcock and
ensure no leaks are present. Install fuel cap
(11).
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.) 3. CHECK CAB HEATER
OPERATION. (REFER TO TM 5-3810-306-10.)
END OF TASK
15-33
