TM 5-3810-307-10
Table 6-1. Operator Troubleshooting (continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3.
Oil leak due to loose or missing pipe plug.
a.
Check for external leak at rear of cylinder head, along fuel pump side
of block, oil cooler cover and gear housing.
b.
Contact Organizational Maintenance.
9. LUBRICATING OIL PRESSURE TOO HIGH.
Step 1.
Engine lubrication system malfunction.
a.
Contact Organizational Maintenance.
10. LUBE OIL LOSS.
Step 1.
External leaks.
a.
Visually inspect for oil leaks. If no leaks, do step 2.
b.
Contact Organizational Maintenance.
Step 2.
Crankcase overfilled.
a.
Remove dipstick and check oil level. If OK, do step 3.
b.
Contact Organizational Maintenance to drain engine oil to proper
level.
Step 3.
Engine lubrication system malfunction.
a.
Contact Organizational Maintenance.
11. CONTAMINATED ENGINE OIL.
Step 1.
Engine lubrication system malfunction.
a.
Contact Organizational Maintenance.
