TM 5-3810-307-10
Table 6-1. Operator Troubleshooting (continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
12. EXHAUST SMOKE EXCESSIVE UNDER LOAD.
Step 1.
Engine overloaded.
a.
Downshift to lower gear.
Step 2.
Fuel system malfunction.
a.
Contact Organizational Maintenance.
13. ENGINE WILL NOT REACH RATED SPEED WHEN LOADED.
Step 1.
Vehicle overloaded.
a.
Reduce load or downshift to lower gear.
Step 2.
Fuel system malfunction.
a.
Contact Organizational Maintenance.
14. LOW POWER.
Step 1.
Vehicle overloaded.
a.
Reduce load or downshift to lower gear.
Step 2.
Engine oil level too high.
a.
Remove dipstick and check engine oil level. If OK, do step 3.
b.
Contact Organizational Maintenance to drain engine oil to proper
level.
Step 3.
Transmission oil level low.
a.
Remove dipstick and check transmission oil level. If OK, do step 4.
Refer to PMCS in Section 5.
b.
Fill to proper level.
