TM 5-3810-307-10
Table 6-1. Operator Troubleshooting (continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3.
Insufficient lubricant on swing bearing.
a.
Inspect swing bearing. Lubricate bearing. Contact Organizational
Maintenance.
Step 4.
Crane not level.
a.
Level crane using outriggers.
Step 5.
Crane overloaded.
a.
Reduce load.
Step 6.
Swing system failure.
a.
Contact Organizational Maintenance.
42. SWING BRAKE SYSTEM WILL NOT OPERATE.
Step 1.
Low hydraulic oil.
a.
Check hydraulic oil level. Refer to PMCS in Section 5. If OK, do
step 2.
b.
Service hydraulic reservoir.
Step 2.
Swing system failure.
a.
Contact Organizational Maintenance.
43. DIESEL HEATER FAILS TO START - MOTOR DOES NOT RUN.
Step 1.
Blown fuse.
a.
Check fuse in heater control panel. If OK do Step 2.
b.
Replace fuse with spare.
Step 2.
Diesel heater failure.
a.
Contact Organizational Maintenance.
