TM 5-3810-307-24-1-1
Organizational Preventive Maintenance Checks and Services - Continued
(1)
(2)
(3)
(4)
(5)
Interval
Item
Item To Be
Equipment Is Not
M
Q
S
A
B
H
No.
Inspected
Procedure
Ready/Available If:
(19)
500
Engine Fuel Filters
Replace filter elements.
NOTE
For secondary fuel
filter only. If filter
change is occurring in
temperatures at or
below 30F (-1C),
use the filter install-
ation procedures an-
notated on cartridge
PLUS 1/4 turn.
(20)
500
Air Governor Filter
Inspect and clean or
Two (2) each filters
replace filter (strainer)
(NSN 4730-002250710)
(Strainer) Elements
elements as required.
required.
(21)
500
Hoist Mounting Bolts Check for proper torque
[250 lbs-ft (339 Nm)].
(22)
2000
Boom
Check hoist to boom
alignment. Refer to
Section 11 for
procedures.
(23)
500
Hook Block
Disassemble hook block,
Hook deformed or
inspect hook for
nut/threaded areas
deformation, and nut and
corroded or improper fit.
threaded areas for
corrosion and proper fit.
(24)
Air System
Disassemble valve, clean
Automatic Drain
parts, inspect for wear
Valve
and deterioration, and
lubricate.
(25)
Lubrication
Perform Semiannual
Lubrication Chart
requirements.
(26)
1000
Brake Linings
Inspect linings for
Linings worn or
excessive wear (to rivet
saturated with grease.
heads) or grease
saturation.
1-3-8 C-1
