TM 5-3810-307-24-1-1
Organizational Preventive Maintenance Checks and Services - Continued
(1)
(2)
(3)
(4)
(5)
Interval
Item
Item To Be
Equipment Is Not
M
Q
S
A
B
H
No.
Inspected
Procedure
Ready/Available If:
(27)
1000
Brakes
Using feeler gauge, check Brakes improperly
for [0.006 0.0015 in.
adjusted.
(0.152 0.04 mm)]
clearance between brake
lining and brake drum.
(28)
1000
Engine Valves
Check/adjust valve
Out of adjustment.
clearance:
Intake - 0.010 in.
(0.254 mm).
Exhaust - 0.020 in.
(0.508 mm).
(29)
1000
Air Cleaner Element Replace air cleaner
element.
(30)
1000
Boom Wear Pads
Clean wear pads and
Wear pads loose or worn
inspect for wear and
excessively.
security.
(31)
Air Dryer
Replace desiccant
cartridge.
(32)
Diesel Fuel Heater
Clean combustion
chamber, check
adjustments, and perform
operating checks.
(33)
Cold Start System
a. Clean and check
a. Metered orifice elbow
metered orifice elbow
damaged.
for damage. Replace
filter.
b. Test temperature
b. Temperature switch
switch.
defective.
(34)
Throttle Air Cylinder Disassemble cylinder,
clean components, and
inspect for wear and
damage.
(35)
Air System Double
Disassemble valves,
Check Valves
clean components, and
inspect for wear and
damage.
(36)
Air System
Perform operating and
Valve operating
Safety Valves
leakage checks, refer to
improperly or leaks
Section 7.
detected.
1-3-9
