TM 5-3810-307-24-1-1
Organizational Preventive Maintenance Checks and Services - Continued
(2)
(1)
(3)
(4)
(5)
Interval
Item
Item To Be
Equipment Is Not
M
Q
S
A
B
H
No.
Inspected
Procedure
Ready/Available If:
(37)
Spring Brake
Disassemble valve, clean
Control Valve
components, and inspect
for wear and damage.
(38)
Air System Service
Disassemble valves,
and Park Brake
clean components, and
Relay Valves
inspect for wear and
damage.
(39)
Air System Carrier
Disassemble valves,
and Superstructure
clean components, and
Cab Brake Valves
inspect for wear and
damage.
(40)
Air Conditioners
Perform Annual PMCS
schedule, refer to
Appendix B.
(41)
Joystick Pilot
Replace inline filter.
Filter is located under an
Control System
access panel, left-rear
Filter
(bottom) of turntable.
(42)
Lubrication
Perform Annual
Lubrication Chart
requirements.
(43)
2000
Air Compressor
Perform air compressor
Excessive carbon build-
discharge inspection,
up in discharge line.
refer to Engine Manual.
(44)
2000
Engine Damper
a. Check index lines on
a. Index lines more
hub and inertia
than 1/16 in. (1.59
member.
mm) out of
alignment.
b. Inspect elastic
member for deter-
b. Elastic member
ioration, missing
deteriorated, pieces
pieces, and excessive
missing, or worn
wear.
excessively [1/8 in.
(3.18 mm) below
metal surface].
(45)
3000
Air Governor
Disassemble governor,
clean components, and
inspect for wear and
damage.
(46)
7200
Air System Dual
Disassemble valve, clean
Brake Valve
components, and inspect
for wear and damage.
1-3-10 C-1
