TM 5-3810-307-24-1-1
l.
If necessary, remove nuts (46), lockwashers (47), capscrews (48), washers (49), and muffler mount bracket
(50) from crane.
Installation
a.
If removed, install muffler mount bracket (50, Figure 2-2-9) on crane with washers (49), capscrews (48),
lockwashers (47), and nuts (46).
b.
If removed, install mounting bands (40) on muffler mount bracket (50) with washers (45), capscrews (44),
lockwashers (43), and nuts (42).
c.
Slide muffler (41) up through mounting bands (40) and place bottom of muffler onto bracket on frame.
Tighten mounting bands (40).
d.
Install exhaust stack (39) with weather cap (35) on muffler (41) with clamp (38), capscrews (37), and
locknuts (36).
e.
Install cover (34) and muffler guard (33) on muffler mount bracket (50) with large washers (32), washers
(31), lockwashers (30), and capscrews (29).
f.
Install exhaust pipe (28) on muffler (41) and frame bracket with clamps (27) and locknuts (26).
g.
Install flexible exhaust tube (25) on exhaust pipe (28) with clamp (24), capscrews (25), and locknuts (22).
h.
Install adapter (21) on flexible exhaust tube (25) and exhaust tube (20) on adapter (21) with clamps (19),
capscrews (18), and locknuts (17).
i.
Install exhaust tube (20) on turbocharger with clamp (14), and secure exhaust tube (20) to engine bracket
with clamp (16) and locknuts (15).
WARNING
Exhaust system components can be very hot.
Use care to avoid serious
burns.
j.
Start diesel engine and check exhaust system for evidence of exhaust leaks. Shutdown diesel engine,
allow exhaust system components to cool, and tighten any clamps as necessary.
k.
Install cover (13) on underside of deck plate forward of right front fender with washers (12), lockwashers
(11), and screws (10).
l.
Install cover (9) on top of right front fender with washers (8), capscrews (7), lockwashers (6), and nuts (5).
m.
Install cover (4) on underside of right front fender with washers (3), lockwashers (2), and capscrews (1).
n.
Close right side engine access door.
2-2-39
